kladder:toolbox_for_de-californiacation:operativ_system:security:vpn:vpn_server
Content-Type: text/x-zim-wiki Wiki-Format: zim 0.6 Creation-Date: 2025-09-21T00:33:23+02:00
== == === VPN Server === == ==
Oprettet søndag 21 september 2025
Nordvpn's guide til opsætning af vpn server på RPI, macos og win10 A Raspberry Pi is one of the most popular choices for hobbyists looking to build a VPN server at home. It's small, inexpensive, energy-efficient, and capable enough to handle basic VPN traffic.
To set up a VPN server on Raspberry Pi:
1.Install Raspberry Pi OS. Use Raspberry Pi Imager to flash the OS onto a microSD card, then boot it up and complete setup. 2.Update the system. Run sudo apt update && sudo apt upgrade to ensure your Pi is up to date. 3.Install OpenVPN or WireGuard. OpenVPN is a solid choice for compatibility, while WireGuard is known for speed and simplicity. 4.Use PiVPN (optional but recommended). PiVPN is a script that automates the entire process of installing and configuring your VPN server. 5.Enable port forwarding. Log in to your router and forward the port your VPN server is listening on (usually 1194 for OpenVPN). 6.Set up a static IP or dynamic DNS. This setup ensures you can always reach your Pi even if your home IP changes. 7.Test your setup. Use a client device to connect from another network and check access to local resources.
If you're not sure what else a Pi can do, this article on what to use a Raspberry Pi for covers many creative use cases.
Sidste redigering: 2025/09/21 tilpasning via AI(LLM) kan forekomme
kladder/toolbox_for_de-californiacation/operativ_system/security/vpn/vpn_server.txt · Last modified: by 127.0.0.1